Specially designed for removal and detailed trimming and carving in all woods. These burs have solid carbide grinding heads and hardened steel shanks. They are all Titanium Nitride Coated to insure superior wear resistant quality. Small Burs (1/4" Diameter Cutting Head) have 3/32" shanks, and are available in quick removal cuts or finishing cuts. These fit most hand grinders and hanging motor handpieces. The larger series must be used in the CTX345 or similar handpiece or air tool. These have a 1/4" shank and the heads are 3/8" in diameter with various lengths. They are designed for clean stock removal. Also the mill-fluted bars for heavy removal are available.